Planet Technology WDAP-2000PE - Manual (Page 30)

3.6 System Tools
3.6.1 Firmware Upgrade
You can upgrade the firmware of your WDAP-2000PE. Normally, this is done when a new
version of firmware is released.
Upgrade procedures:
Step 1: Select System Tools Firmware Upgrade from the menu.
Step 2: To update the WDAP-2000PE firmware, first download the firmware from the distribu-
tor’s web site to your local disk, and then from the above screen enter the path and filename of
the firmware file (or click Browse to locate the firmware file). Next, Click the Upgrade button to
start.
The new firmware will begin being loaded to your WDAP-2000PE. After a message appears
telling you that the operation is completed, you need to reset the system to have the new firm-
ware take effect.
28