Pitney Bowes DM1000 - Manual (Page 41)

4-8 SV60951 Rev. A
4 Running Mail
The DM1000 is designed to use gummed tape or a special pressure
sensitive adhesive tape made exclusively for it. You cannot print postage
tapes in the Seal Only, W-O-W, or Weigh First Piece modes.
To print one tape, you simply press the Tape key instead of placing mail
on the deck.
To print more than one tape, use the numeric keys to type in the number
of tapes you want, then press the Tape key. The tapes exit into the stacker
on the right side of the mailing system. You can request up to 50 tapes at
a time.
To moisten gummed tape, move the “wet/dry” tape lever up.
• Wet tapes exit one at a time. The machine pauses for you to
remove each wet tape before it prints and ejects another one.
• If you do not remove wet tape within the required time, the
machine stops. Remove the tape and press the Start button to
continue.
• If you use wet tapes make sure you have enough E-Z Seal ® in the
bottle.
For dry tapes or pressure-sensitive tapes, move the “wet/dry” tape
lever down.
About Printing
Postage Tapes
Do not lift any of the covers on the mailing system while
the system is printing or the system stops printing.
WARNING! Use only fresh rolls of Pitney Bowes tape to
avoid distortion or jams in the mechanism and possible
loss of postage.