Limited polar warranty – POLAR SMARTEDGE User Manual

Page 28

Limited Polar

Warranty

• Polar Electro Oy warrants to the original consumer/

purchaser of this heart rate monitor that the product will be

free from defects in material or workmanship for one year

from the date of purchase. Please keep the receipt

which is your proof of purchase!

• Warranty does not cover receiver battery, damage due to

misuse, abuse, accidents or negligence of the precautions;

improper maintenance, commercial use, cracked or broken

cases.

• Warranty does not cover damage or consequential damage

caused by service not authorised by Polar Electro Oy.

• During the warranty period the product will be either repaired

or replaced at an authorised service centre free of charge.

• For more details, please see the warranty card.

Polar Electro Oy, FIN-90440 KEMPELE, Finland

form or by any means without prior written permission of Polar Electro Oy.

Polar logotype, Polar Pacer and Polar Beat

are registered trademarks of Polar Electro Oy.

Polar Vantage NV, Polar XTrainer Plus, Polar Accurex Plus, Polar Protrainer XT,

Polar Protrainer NV, Polar Protrainer XT, Polar Advantage Interface,

Polar Precision Performance, Polar Interface Plus, Polar Training Advisor,

Polar SmartEdge, Polar Fitwatch, Polar Heartwatch and Polar Favor are

trademarks of Polar Electro Oy.

This CE marking shows compliance of this product with Directive 93/42/EEC.

SENDING INSTRUCTIONS

1. Pack the product carefully to avoid further damage.

2. Include all the parts of the Polar Heart Rate Monitor. A full

periodic check will be done on the whole product.

3. Include proof of purchase (a receipt or its photocopy) if the

product is under warranty.

4. Include a detailed description of the problem. Use the

return sheet of the Customer Care Charter!

5. Include your name, return address and daytime

telephone number.

6. Ship postage prepaid to your dealer or distributor. For

contact details see the Customer Care Charter or the

warranty card.

POLAR’S SERVICE PROCEDURE

Any service is recommended to be done by an authorised

Polar service personnel. Our standard test and check

procedure will be performed on all Polar Heart Rate Monitors.

The test includes the following elements:

POLAR TRANSMITTER

1. Visual inspection

2. Check of the transmission range

3. Check of electrode conductivity

4. Wash and clean if necessary

POLAR WRIST RECEIVER

1. Visual inspection

2. Check of battery voltage

3. Check and cleaning of case contacts

4. Re-assembly, including seal renewal if necessary

5. Water resistancy test

6. Operational test

Water resistance cannot be guaranteed after

unauthorised service.

0537