Paxar Monarch 917 User Manual

Page 41

6. Decide if you want to see this prompt in Batch Entry mode

and press either L or R to display your selection. Press
E. You will see

Number of parts
Default? No

7. Decide if you want to change the default setting of one (1)

and press either L or R to display your selection. Press
E. If you select "Yes," you will see

Number of parts
[1/5]: +1

8. Select the number of parts to print across the supply by

pressing R to increase the number or L to decrease the
number. Press E. The range is one through five.

What you see next depends on if you have a knife installed.
Without a knife, the next prompt you see is for Print Multiple.
With a knife installed, you will see

Cut Option
Prompt? Yes

9. Decide if you want to see this prompt in Batch Entry mode

and press either L or R to display your selection. Press
E. You will see

Cut Option
Default? No

10. Decide if you want to change the default and press either L

or R to display your selection. Press E. You will see

Cut Option
No

Setting Format Options 6-3