Paxar Monarch 917 - Manual (Page 22)

S p e e d
You can change the print speed for bar codes or graphics. If you
select "default" for speed, formats with serial bar codes
automatically print at 2.5IPS. Other formats print at 6.0IPS.
Refer to the following table for maximum print speeds for your
printer.
Printer Maximum Print Speed
9835 6.0 ips
9840 8.0 ips
9850 10.0 ips (thermal direct only)
NOTE: 203 dpi serial bar codes with narrow elements
3 dots (or greater) can be printed at 4.0 ips. For
additional high speed printing information, refer to your
9850 Operator’s Handbook.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press L or R until you see
SUPPLY
l Speed
2. Press E to set the speed option. You will see the current
setting, for example:
SPEED
6.0 IPS r
3. Press L or R to see the other options. After you display the
option you want, press E. Press e twice to exit to the
Main menu.
2-10 Setting Supply Options