Paxar Monarch 917 User Manual

Page 24

3. Press L or R to see the other options. After you display the

option you want, press E. Press e twice to exit to the
Main menu. You can only enable or disable
backfeed/extended backfeed. You cannot set the backfeed or
dispense position. Your System Administrator should refer to
the optional Packet Reference Manual to set the backeed or
dispense position.

V e r i f i e r

The verifier scans and checks the quality of bar codes as they are
printed. The optional verifier must be purchased separately.

This option only appears if you are using a

9850 printer.

To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.

1. Press L or R until you see

SUPPLY

Verifier

2. Press E to set the verifier option. You will see the current

setting, for example:

VERIFIER

Disabled

3. Press l or r to see the other option. After you display the

option you want, press E. Press e twice to exit to the
Main menu. For additional verifier information, refer to your
verifier’s manual.

2-12 Setting Supply Options