Paxar Monarch 917 - Manual (Page 15)

Changing this setting only affects new
formats sent to the printer.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press L or R until you see
SUPPLY
l Separators r
2. Press E to set the batch separators option. You will see
the current setting, for example:
SEPARATORS
Off r
3. Press L or R to see the other option. After you display the
option you want, press E. Press e twice to exit to the
Main menu.
Batch Separator
Setting Supply Options 2-3