Paxar Monarch 9855 - Manual (Page 5)

1
This Quick Reference contains supply loading and general maintenance
procedures. Additional RFID documents are available on the enclosed Monarch

Tabletops RFID Demo CD-ROM and on our Web site (www.paxar.com). Always
check our Web site for the latest release/addendum information.
R F I D O v e r v i e w
Your printer has been engineered to program (encode) an RFID (Radio Frequency
Identification) label (commonly called “RFID tags”) before the label’s format is
printed. RFID tags contain an embedded RFID chip and antenna. References to
“RFID tags” in this document refer to RFID supplies, not tag stock.
RFID is only available on the Monarch
 9855 printer using thermal transfer or
thermal direct, die cut labels. For more information about supplies, see “About
RFID Supplies.” The knife option and linerless supplies are not currently
supported. See “Specifications” for more information. The RFID printer is also
capable of printing standard (non-RFID) supplies.
Using Version 3.2 or greater firmware, the printer supports multi-protocol encoding,
including Class 0+, Class 1 Generation (Gen) 1, Class 1 Generation (Gen) 2, and
UCODE Version 1.19 supplies. Matrics 0+ protocol is only included for demo
purposes and low encode yields are expected. Contact your RFID Account
Manager to obtain Matrics 0+ supplies in limited quantities for demo purposes.
Note:
Do not modify the Supply Position when using RFID supplies greater
than a two-inch feed length. See “About RFID Supplies” for more
information.
A b o u t P r o f e s s i o n a l S e r v i c e s
Our Professional Services group can develop custom RFID scripts (applications) or
other types of data manipulation scripts. Our experts can ensure your RFID
requirements are met. Custom programming can be factory-loaded at the time of
shipment. Call Customer Service for more information.