Paxar Monarch 9855 - Manual (Page 12)

8
2 .
Press down on the exit cover tabs to open the exit cover on the front of the
printer.
3 .
Feed the backing paper over the peel bar.
4 .
Feed the backing paper through the lower opening of the exit cover. Close the
exit cover. Pull down on the backing paper to remove any slack.
When removing the backing paper, pull up across the saw-toothed tear
edge. Make sure the backing paper tears at the edge.
5 .
Close the printer's cover.
6 .
Press Feed/Cut several times to feed at least three labels/tags to properly
position the supply and the ribbon.
Peel
Bar
Low er
Opening
Exit Cover Tabs
Tear
Edge
Backing
Paper