Paxar Monarch 9855 - Manual (Page 16)

12
When printing on non-RFID supplies, you may also see a label with an
overstrike pattern. Do not use that label. When using “overstrike” as the
Error Action, the format prints on the non-RFID label, but there is no
format printed on the RFID label.
Note: The RFID printer pauses while programming the RFID tag.
3 .
Remove the printed labels. If the printer will be unused for extended periods of
time, we recommend leaving the printhead unlatched.
Universal Serial Bus (USB) Information
This printer has a USB Version 1.1 communications port. Drivers are available for
a variety of operating systems. These drivers provide a Virtual Communications
Port (VCP), which looks like a normal serial port (for example, COM1-4). After
installing the drivers, change the communications port to the one allocated by the
VCP driver. For these drivers, go to our Web site (www.paxar.com).
M e n u C h a n g e s
Some changes were made to the menu structure for RFID. These menus should
only be accessed by your System Administrator. Refer to the RFIDMP (Multi-
Protocol) Application Notes (available on our Web site) for more information.
RFID Overstrike Non- RFID Overstrike