Pioneer AVH-P6450CD - Manual (Page 13)

12
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
2. Fastening the unit to the factory radio mounting bracket. (Fig. 13) (Fig. 14)
Select a position where the screw holes of the bracket and the screw holes of this product
become aligned (are fitted), and tighten the screws at 2 places on each side. Use any of
binding screws (4
× 3 mm), binding screws (5 × 6 mm) or flush surface screws (5 × 6
mm), depending on the shape of the screw holes in the bracket.
*1 Use binding screws (4
× 3 mm) only.
Fig. 13
Fig. 14
Screw
Factory radio mounting bracket
Dashboard or Console
*1 *1