Peavey ICS 4200 - Manual (Page 17)

17
Current Consumption
(Multiply current by 0.5 for 230 V units)
Rated power 15.4 A (4 Ohms) 13.2 A
9.9 A (8 Ohms)
1/3 power 9.9 A (4 Ohms) 8.6 A
6.3 A (8 Ohms)
1/8 power 6.6 A (4 Ohms) 5.8 A
4.2 A (8 Ohms)
Idle 0.4 A 0.7 A
Thermal Emission
1/3 power 3147 BTU/hr (4 Ohms) 2614 BTU/hr
1990 BTU/hr (8 Ohms)
1/8 power 2364 BTU/hr (4 Ohms) 2036 BTU/hr
1500 BTU/hr (8 Ohms)
Controls
Front: 4 channel input signal attenuators‚ AC switch
Rear: 2 x 4 DIP switches for input module assign‚ 2 output mode switches
Indicator LEDs
4 clip‚ 4 signal‚ 1 power
Protection
Over-temperature‚ DC‚ turn on/off transients‚ subsonic‚ incorrect load‚ short-circuit
Connectors
Input: Four 3-position Euro-style detachable terminal blocks‚ two ports for MMA ™ input modules
Output: Two 4-position barrier strips
Construction
16-gauge steel-reinforced with 12-gauge rack ears
Dimensions
Height: 3.50" (8.84 cm); 2 EIA rack spaces
Width‚ front: 19.00" (48.26 cm)
Width‚ rear: 17.00" (43.18 cm)
Overall depth: 17.05" (43.31 cm)
Mounting depth: 16.63" (42.24 cm) behind front rack ears
W We eiig gh htt
40 lbs. (18.1 kg)
P Po ow we err R Re eq qu uiirre em me en nttss
100‚ 120‚ 230–240 Vac‚ 50–60 Hz
T Te esstt C Co on nd diittiio on nss
120Vac‚ 60 Hz line input voltage maintained
All channels operating unless otherwise noted
(Due to our efforts for constant improvements‚ features and specifications listed herein are subject to change without notice.)