Philips MBD3000 - Manual (Page 36)

37
10 Troubleshooting
Warning
Risk of electric shock. Never remove the •
casing of the product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, register your product
and get support at www.philips.com/welcome.
Main unit
No reaction to the remote control.
Connect this product to the power •
outlet.
Point the remote control at the IR sensor
•
located on the front panel of this product.
Insert the batteries correctly.
•
Insert new batteries in the remote •
control.
Timer does not work
Set the clock correctly. •
Switch on the timer. •
Clock/timer setting erased
Power has been interrupted or the power •
cord has been disconnected.
Reset the clock/timer.
•
Picture
No picture.
See TV manual for correct video input •
selection. Change the TV channel until
you see the Philips screen.
No picture on HDMI connection.
If this product is connected to an •
unauthorized display device with an
HDMI cable, the audio/video signal may
not be output.
Check if the HDMI cable is faulty. Replace
•
with a new HDMI cable.
Wave length: •
BD: 405 +5 nm/-5 nm •
DVD: 650 +5nm/-10nm •
CD: 790 +10nm/-20nm •
Output power:
•
BD: Max. ratings: 20mW •
DVD: Max. ratings: 7mW •
CD: Max. ratings: 7mW •
English
EN