Philips MBD3000 - Manual (Page 10)

11
Analog stereo system •
FM antenna
•
USB flash drive •
Wired/Wireless network •
Note
Refer to the type plate at the back or bottom •
of the product for identification and supply
ratings.
Before you make or change any connections,
•
ensure that all the devices are disconnected
from the power outlet.
Connect speakers
Note
Insert the stripped portion of each speaker •
wire into the socket completely.
For optimal sound, use the supplied speakers
•
only.
Connect only speakers with impedance that is
•
the same or higher than the supplied speakers.
For the main unit side:
1
Match the type and colors of the speaker
cable connectors to the speaker input
sockets on the back of the main unit.
2
Connect the speaker cables.
COAXIAL Pr/Cr
Pb/Cb COMPONENT W i - F i Y OPTICAL DIGITAL AUDIO OUT
O E D I V T U O
DIGITAL AV OUT L AN
AC ~
AUX IN
LINE
OUT
L R
L R
ANTENNA FM
S P E A K E R O U T R L
3 Connect
Make the following connections to use this
product.
Preparations
1
Place the apparatus near to the TV.
2
Place the front left and right speakers
at equal distance from the TV and at an
angle of approximately 45 degrees from
the listening position.
Note
To avoid magnetic interference or unwanted •
noise, never place this apparatus and speakers
too close to any radiation devices.
Basic connections:
Speakers •
Video •
Audio •
Power •
Optional connections:
Route audio to other devices •
HDMI-compliant AV receiver/ •
amplifier
Multi-channel AV amplifier/receiver
•
Digital AV amplifier/receiver •
English
EN