Connecting a usb device removing a usb device, Enjoying through external equipment 12 – Pioneer PDP-5080HD User Manual
Page 70
70
En
Enjoying through External Equipment
12
Enjoying through USB interface (Home
Gallery function)
On this system, you can watch JPEG images that have been
captured and stored in memory cards using a digital still camera.
You can also connect your digital camera directly to the plasma
display using a USB connector cable.
Note
• A single USB device can only be connected at a time. No USB
hub can be connected.
• Such devices as a printer or keyboard cannot be connected
and used.
Readable memory cards
This system can read memory cards whose formats are FAT12,
FAT16, FAT32, or VFAT.
Readable data files
This system can read only JPEG files that meet the following
conditions:
• Extensions are JPG or JPEG.
• JPEG 4:2:2 and 4:2:0 format
• The image resolution must be less than 3264 pixels in the
horizontal direction and 2448 pixels in the vertical direction.
• The image resolution must be higher than 160 pixels in the
horizontal direction and 120 pixels in the vertical direction.
Note
• This system may not be able to display images, depending on
the type of your memory card, or camera.
• This system may not be able to display images modified or
edited using a personal computer or other equipment.
• This system complies with the USB Mass Storage Class.
Connecting a USB device
Hold the USB device’s connector with its top side facing
the front panel, and then insert it into the USB port on
the side of the plasma display.
• Insert the USB device’s connector as far as it goes.
• When using the USB connector of your device, connect it
directly to the USB port.
Removing a USB device
To remove a USB device’s connector, quit the Home Gallery
screen and then remove it.
Note
• For details on connectable devices, see Pioneer’s website:
http://www.pioneerelectronics.com
• Be sure to quit the Home Gallery screen before removing the
USB device. If you remove the USB device while the Home
Gallery screen is displayed, data inside the memory may be
damaged.
• Do not insert or remove the USB device immediately after the
system is switched on or off. This may cause data inside the
memory to be damaged.
• Do not turn the digital camera off while the Home Gallery
screen is displayed.
Digital still
camera
Multi-card reader
Image data display
USB connector cable
USB flash drive
Side of the plasma display
USB flash drive or
multi-card reader
12_Enjoying.fm Page 70 Monday, April 16, 2007 3:20 PM