Pioneer PDP-5080HD - Manual (Page 39)

39
En
Tuner Setup 09
Englis
h
8 Enter the same password that you have entered in
step 7.
• A confirmation screen appears.
9 Press A.
10 Press HOME MENU to exit the menu.
Note
• Take note of the newly set password and keep it handy.
Clearing the password
Use the following procedure to clear the password.
1 Press HOME MENU.
2 Select “Tuner Setup” ( / then ENTER).
3 Select “Parental Control” ( / then ENTER).
4 Select “Password” ( / then ENTER).
5 Select “Clear Password” ( / then ENTER).
6 Enter the current four-digit password, using buttons 0
to 9.
• A confirmation screen appears.
7 Press A.
8 Press HOME MENU to exit the menu.
Note
• The above procedure will reset the password to the factory
default (1234).
Activating the Parental Control
1 Press HOME MENU.
2 Select “Tuner Setup” ( / then ENTER).
3 Select “Parental Control” ( / then ENTER).
4 Select “Status” ( / then ENTER).
5 Select “On” ( / then ENTER).
• The password entry screen appears. Enter your four-digit
password using buttons 0 to 9.
6 Press HOME MENU to exit the menu.
Setting the voluntary movie rating system
(MPAA)
1 Press HOME MENU.
2 Select “Tuner Setup” ( / then ENTER).
3 Select “Parental Control” ( / then ENTER).
4 Select “MPAA Ratings” ( / then ENTER).
5 Select the desired rating and change the setting ( /
then ENTER).
• The password entry screen appears. Enter your four-digit
password using buttons 0 to 9.
• Each time you press ENTER, the setting is switched.
• A lock icon appears beside the blocked rating.
• All the ratings have been unblocked before shipment.
6 Press HOME MENU to exit the menu.
Note
• Blocking a rating causes more severe ratings to be
automatically blocked as well. Likewise, unblocking a rating
causes less severe ratings to be automatically unblocked.
Setting the TV ratings
1 Press HOME MENU.
2 Select “Tuner Setup” ( / then ENTER).
3 Select “Parental Control” ( / then ENTER).
4 Select “TV Ratings” ( / then ENTER).
5 Select the desired rating and change the setting ( /
then ENTER).
• The password entry screen appears. Enter your four-digit
password using buttons 0 to 9.
• Each time you press ENTER, the setting is switched.
• A lock icon appears beside the blocked rating.
• All the ratings have been unblocked before shipment.
Parental Control Password
Change Password
Password
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Clear Password
Exit Home Menu
We suggest you write down your password so you don’t forget it.
If you forget the password
When the message “Enter your Password” is displayed in step 6
under “Clearing the password”, press the
ENTER button on the
remote control unit and hold it down for three seconds or longer.
The password reverts to “1234”.
PDP-5080HD/PDP-4280HD
Your password No.:
Parental Control MPAA Ratings
N/A MPAA Ratings Blocked MPAA Ratings
N/A, G, PG,PG-13, R, NC-17
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
G
PG
Exit Home Menu
TV Ratings
TV-Y TV-Y
TV-Y7 TV Ratings
Blocked TV Ratings
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
TV-G
TV-PG
Exit Home Menu
Parental Control
TV-None
PDP5080HD.book Page 39 Monday, April 9, 2007 7:49 PM