beautypg.com

7 adjust system settings, Turn beep sound on/off, Turn display scroll on/off – Philips CEM200 User Manual

Page 17: Turn demo mode on/off, Select start volume

background image

18

3

Press or repeatedly to until [A-VOL]
is displayed.

4

Turn to select a value: 0 - 47.

Turn beep sound on/off

Each time you press a button, the unit beeps.
You can turn off/on this beep sound.

1

Press MENU/DISP for3 seconds.

2

Press or repeatedly to until [BEEP
ON] or [BEEP OFF] is displayed.

3

Rotate to select a setting:
‡

[BEEP ON]: Turn on the beep
sound.

‡

[BEEP OFF]: Turn off the beep
sound.

Turn display scroll on/off

For track information that is longer than the
display panel: you can select to cut off the
remainder of the text, or scroll to display the
full text.

Note

If any special characters are present in the

‡

MP3 track name or album name, it may not
display correctly on the screen because these
characters are not supported.
Some WMA is protected by Digital Rights

‡

Management (DRM), it cannot be played on
the unit.
)ROGHUVÀOHVH[FHHGWKHVXSSRUWHGOLPLWRIWKH

‡

unit are not displayed or played.

1

Press MENU/DISP for 3 seconds.

2

Press or repeatedly to until [ROLL
ON] or [ROLL OFF] is displayed.

3

Turn to select a setting:
‡

[ROLL ON] (scroll on): Auto scroll
during play.

‡

[ROLL OFF] (scroll off ): No auto
scroll display.

7 Adjust system

settings

Turn demo mode on/off

When demo mode is on, when the unit is
idle for more than 2 minutes, all functions are
displayed.

1

Press MENU/DISP for 3 seconds.

2

Press or repeatedly to until [DEMO]
is displayed.

The screen shows current Demo

»

mode setting.

3

Turn to select a setting:
‡

[DEMO ON] : Turn on the demo
mode.

‡

[DEMO OFF] : Turn off the demo
mode.

Select start volume

Each time you turn on the unit, it can play at the
last listened volume or at the preset volume.

1

Press MENU/DISP for 3 seconds.

2

Press or repeatedly to until [V -
LAST] or [V - ADJ] is displayed.

3

Turn to select a setting:
‡

[V - LAST] : Each time you turn on
the unit, the volume remains from its
previous use.

‡

[V - ADJ] : Each time you turn on
the unit, the volume is at the preset
level.

Store preset volume

You can turn on the unit at a preset volume.

1

Select [V - ADJ] as the start volume.

2

Press MENU/DISP for 3 seconds.

EN