Philips CEM200 - Manual (Page 13)

14
4 Listen to radio
Tune to a radio station
1
Press SOURCE repeatedly to select
Tuner.
2
Press or to select band: [FM1],
[FM2], [FM3], [AM1], or [AM2] .
3
Press or to tune to a radio station
manually.
The radio station is broadcast.
»
To search for a radio station ‡
automatically, press or for 3
seconds.
Select tuner sensitivity
You can adjust the tuner sensitivity if you want
to receive more radio stations or only stations
with strong signal.
1
Press MENU/DISP for over 2 seconds.
2
Press or repeatedly until [LOCAL]
or [DX] is displayed.
3
Rotate to select a setting:
[ ‡ LOCAL] (local): Only stations with
strong signal can be broadcast.
[
‡ DX] (distance): Stations with strong
and weak signals can be broadcast.
Select stereo/mono broadcasting
For stations with weak signals: to improve the
reception, change to monoaural sound.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly until [STEREO]
or [MONO] is displayed.
3
Turn to select a setting:
‡
[STEREO]: stereo broadcast.
‡ [MONO]: mono broadcast.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Turn on
1
Press to turn on the unit.
To turn off the unit, press ‡ for 3
seconds.
Set clock
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly until the
currently time is displayed.
3
Turn clockwise to set hour.
4
Press WRFRQÀUP
5
Turn anti-clockwise to set minute.
6
Press WRFRQÀUP
View clock
1
Press MENU/DISP repeatedly until the
clock is displayed.
EN