Philips CEM200 - Manual (Page 16)

17
Select preset equalizer
1
Press EQ/Audio.
The current Equalizer setting is
»
displayed.
2
Press EQ/Audio again repeatedly to
select a preset EQ:
‡
[OPTIMAL] (optimal)
‡ [FLAT] ÁDW
‡ [POP] (pop)
‡ [USER] (user)
‡ [TECHNO] (techno)
‡ [ROCK] (rock)
‡ [CLASSIC] (classic)
‡ [JAZZ] (jazz)
Other sound settings
You can also edit user preset EQ.
1
Press EQ/Audio for 3 seconds.
2
Press or repeatedly to select the
item to be adjusted:
‡
[BAS] (bass) range: -7 to +7.
‡ [TRE] (treble) range: -7 to +7.
‡ [BAL] (balance) range: 12L to 12R. (L
= left speaker, R = right speaker)
‡ [FAD] (fader) range: 12R to 12F. (R =
rear speaker, F = front speaker)
3
Turn to select a value.
6 Adjust sound
Adjust volume
1
Turn clockwise/anticlockwise to
increase/decrease volume.
Mute
You can turn off the sound of your audio.
1
During play, press MUTE .
To turn the sound back on, press ‡
MUTE again.
Turn Dynamic Bass Boost
(DBB) on/off
1
Press DBB, the current setting is
displayed:
» [DBB ON] : The Dynamic Bass Boost
(DBB) function is on.
» [DBB OFF] : The DBB function is off.
2
Press DBB again to change the DBB
setting.
English
EN