Philips CEM200 - Manual (Page 12)

13
2
Insert the right side of the panel in the
chassis until it is correctly engaged.
3
Press the left side of the panel and point
the left hole at the left pillar.
4
Release the panel to engage the left side.
Install remote control battery
Caution
Risk of explosion! Keep batteries away from ‡
KHDWVXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHV
LQÀUH
Risk of decreased battery life! Never mix
‡
different brands or types of batteries.
Risk of product damage! When the remote
‡
control is not used for long periods, remove
the batteries.
Perchlorate Material - special handling may
‡
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
)RUÀUVWWLPHXVH
1
Remove the protective tab to activate the
remote control battery.
6
Place the supplied rubber cushion over
the end of the mounting bolt.
7
Slide the unit into the dashboard until you
hear a click sound.
8
Reconnect the negative terminal of the
car battery.
Attach the front panel
1
Attach the trim plate.
5mm 5mm
English
EN