Supplying a password for bridge calls – Polycom HDX Systems User Manual
Page 27
I
NCLUDING
M
ULTIPLE
S
ITES IN
C
ALLS
© Polycom, Inc.
23
To place a multipoint call using a multiple-site directory entry:
1. Press
Directory on the remote control.
2. Find the multiple-site entry in the directory list.
3. Press
Call to place the call.
To place a cascaded multipoint call:
1. Place a multiple-site call from the directory, or place calls one at a time
to several other sites.
2. Ask each site to call additional sites.
Supplying a Password for Bridge Calls
Bridges such as Polycom MGC sometimes require you to enter a password in
order to join a conference. Depending on your system configuration, you can
set up the system to enter the meeting password for you.
To configure a meeting password:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Enter the password in the Meeting Password field in one of these
ways:
Press the remote control number buttons, using the text-entry method
commonly used with cell phones.
Press
Keyboard to use the onscreen keyboard to enter
characters.
4. Press
Home to save your change and return to the home screen.
If you need to generate touch tones (DTMF tones), press
on the remote control,
then use the remote control keypad. Or, press
and choose Touch Tones.