Polycom S203 - Manual

Field Guide to Videoconferencing
Salmon Arm S203
Making a videoconference call
Pick up the Polycom remote (which should be
sitting in on the table with the Elmo, DVD/VCR
and computer.
Position the TV on the cart and turn on the TV.
If, for some reason, the Polycom system is turned off, its power
switch is on the back of the unit.
Press the Call/Hang up button on
the top of the remote and look
for this screen on one of the TVs.
Use the arrows on the remote to
navigate to the Address Book and
press the centre circle to choose
that selection.
Use the arrows to scroll to the site you want to
dial and use the centre circle to choose that
selection.
Adjusting the camera.
To adjust the cameras in this room use the
Polycom remote. Point the remote at the camera
unit on top of the TV. Press the remote button
labeled Near. Then use the arrows to position and
zoom your camera.