Polycom 4400 - Manual (Page 32)

VIEW Certified Configuration Guide
PN: 1725-36192-001_H 32
handset power should be configured to match the highest transmit
power of the APs. Click the Apply button to save the settings.
12. In the navigation pane under
802.11b/g/n
, select
EDCA
Parameters.
13. Select WMM from the drop-down list.
14. Click Apply button to saved changes
Admission Control (ACM) must be enabled on both the Voice and
Video AC when the handset is configured for Admission Control
Mandatory.
15. In the navigation pane under 802.11b/g/n, select Voice
16. Select the
Admission Control
(
ACM
) checkbox. (This step is optional if
the handset is configured with Admission Control set to Optional,
this setting must match setting in Video)
Any WLAN using the network must be disabled before changing
Admission Control settings.
17. In the navigation pane under 802.11b/g/n, select Video
18. Select the
Admission Control
(
ACM
) checkbox. (This step is optional if
the handset is configured with Admission Control set to Optional,
this setting must match setting in Voice)