Polycom 4400 - Manual (Page 28)

VIEW Certified Configuration Guide
PN: 1725-36192-001_H 28
4. Under
DHCP Information
, enter the IP address of the
Primary DHCP
Server
.
5. Repeat this step for the
ap-manager
interface.
6. Click the
Apply
button and save the changes.
AP Configuration
All handsets operating on a given AP radio must have the same
QoS setting. All APs supporting the handsets must be configured to
enable the corresponding features.
1. Power-on and connect the APs to the network. Wait a few minutes
for the APs to find the controller.
2. Verify the APs are associated to the WLC.
3. From the main menu, click
Monitor
.