Polycom 4400 - Manual (Page 30)

VIEW Certified Configuration Guide
PN: 1725-36192-001_H 30
3. Select
Configure
from the drop-down list for the access point you
wish to change.
Global settings for RF Channel Assignment and Tx Power Level
Assignment were not tested. For Custom Tx Power and RF Channel
settings please consult your facility’s RF site survey — optimized for
wireless voice traffic
— to determine correct power and channel
settings for each AP using only channels 1 , 6 and 11 .
4. Set
Admin Status
to
Enable
.
5. Configure any other settings that might be relevant to your
deployment as needed.
6. Click the
Apply
button to save all changes.
Screenshot for 1100, 1130, 1200, 1230 and 1240 series access points: