Polycom 4400 User Manual
Page 15
Section 1: SVP
Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
PN: 1725-36192-001_H
15
Configuration for handsets running in 802.11a
mode
1. From the main menu, click
Wireless
.
2. In the navigation pane, under
Access Points
click
Radios,
then select
802.11a /n
. All the APs that are connected should be listed, showing
their
Operational Status
as
UP
.
3. Select
Configure
from the drop-down list for the access point you
wish to change.
Global settings for
RF Channel Assignment
and
Tx Power Level
Assignment
were not tested. For
Custom
Tx
Power
and
RF
Channel
settings please consult your facility’s RF site survey — optimized for
wireless voice traffic
— to determine correct power and channel
settings for each AP using non-overlapping channels.
4. Set
Admin
Status
to
Enable
.
5. Configure any other settings that might be relevant to your
deployment as needed.
6. Click the
Apply
button to save all changes.