Polycom 4400 User Manual
Page 19
Section 1: SVP
Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
PN: 1725-36192-001_H
19
8. Under the
QoS
tab, set
Quality of Service
to
Platinum
. This is the
required setting for voice traffic.
9. Set
WMM
Policy
to
Disabled
(Note: This is required for usage with
SpectraLink Wireless Telephones using SVP for QoS).
Under the Advanced tab, uncheck the Client Load Balancing & Client
Band Select boxes.
10. Under the
Security
tab. At
Layer 2 Security
select the desired security
policy from the drop-down list.
a. For WPA2-PSK, under
WPA+WPA2 Parameters:
i. Select the
WPA2-Policy
check box.
ii. Select the
AES
check box for
WPA2-Encryption
.
iii. At
Auth Key Mgmt
select
PSK
from the drop-down list.