Polycom 4400 - Manual (Page 11)

Section 1: SVP
Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
PN: 1725-36192-001_H 11
2. In the navigation pane, click
Interfaces
. Verify that the proper IP
addresses are assigned to the interfaces.
3. Under
Interface Name
click
management
.
4. Under
DHCP Information
, enter the IP address of the
Primary DHCP
Server
.
5. Repeat this step for the
ap-manager
interface.
6. Click the
Apply
button and save the changes.
AP Configuration
All handsets operating on a given AP radio must have the same
QoS setting. All APs supporting the handsets must be configured to
enable the corresponding features.
1. Power-on and connect the APs to the network. Wait a few minutes
for the APs to find the controller.
2. Verify the APs are associated to the WLC.
3. From the main menu, click
Monitor
.