Patton electronic 1080A-64 - Manual (Page 2)

2
CONTENTS
1.0 Warranty Information ................................................................. 4
1.1 Radio and TV Interference............................................................ 4
1.2 CE Notice...................................................................................... 4
1.3 Service.......................................................................................... 5
2.0 General Information.................................................................... 6
2.1 Features........................................................................................ 6
2.2 Description.................................................................................... 6
3.0 Configuration Overview ............................................................. 7
3.1 Configuration Switches ................................................................. 7
3.2 Configuration Switch Set “S1”....................................................... 8
Switches S1-1 through S1-4: Data Rate Setting .......................... 8
Switches S1-5 and S1-6: Clock Source........................................ 9
Switch S1-7: Asynchronous/Synchronous Mode.......................... 9
Switch S1-8: Carrier Control Method.......................................... 10
3.3 Configuration Switch Set “S2”..................................................... 10
Switches S2-1 and S2-2: Word Length ...................................... 11
Switch S2-3: Extended Signaling Rate....................................... 11
Switches S2-4 and S2-5: RTS/CTS Delay ................................. 11
Switch S2-6: V.54 Loopback Test Enable .................................. 12
Switch S2-7: 2-Wire/4-Wire Mode Selection .............................. 12
3.4 Configuration Switch Set “S3”..................................................... 12
Switches S3-1 & S3-2: Input Impedance.................................... 12
Switch S3-4: Mode Selection...................................................... 13
Switch S3-5: RS-232 Initiation of Local Loopback Test.............. 13
Switch S3-6: RS-232 Initiation of Remote Loopback Test.......... 14
Switches S3-7 and S3-8: Anti-stream Control ............................ 14
4.0 Installation................................................................................. 15
4.1 Two-wire Installation ................................................................... 15
Two-Wire Cable Connection Via RJ-45...................................... 16
Two-Wire Cable Connection Via Terminal Blocks...................... 17
4.2 Four-wire Installation .................................................................. 17
Four-Wire Cable Connection Via RJ-45 ..................................... 18
Four-Wire Cable Connection Via Terminal Blocks ..................... 19
4.3 Four-wire, Multipoint Installation ................................................. 19
Multipoint Twisted Pair Connection ............................................ 20
4.4 RS-232 Connection .................................................................... 21
5.0 Operation................................................................................... 22
5.1 LED Status Monitors ................................................................... 22
The “TD” and “RD” Indicators ..................................................... 22
The “RTS” and “CD” Indicators................................................... 22
The “Test” Indicator .................................................................... 22
The “Error” Indicators ................................................................. 23
5.2 Anti-streaming Error Indicator ..................................................... 24
5.3 Power-up .................................................................................... 24