Patton electronic 1080A-64 - Manual (Page 10)

10
Switch S1-8: Carrier Control Method
The setting for switch S1-8 determines whether the carrier is “constantly
on” or “controlled by RTS”. This setting allows for operation in switched
carrier, multipoint and/or hardware handshaking applications.
3.3 CONFIGURATION SWITCH SET “S2”
The DIP switches on S2 set word length, extended signaling rate,
RTS/CTS delay, V.52 and V.54 diagnostic test and 2- and 4-wire opera-
tion.
Table 3: S2 Summary
S1-8 Setting
Off Constantly on
On Controlled by RTS
Position Function Factory Default
S2-1 Word Length Off
S2-2 Word Length Off
S2-3 Extended Signaling Rate Off -2.5% to 1%
S2-4 RTS/CTS Delay On
S2-5 RTS/CTS Delay On
S2-6 V.52/V.54 Tests Off Normal Operation
S2-7 2-Wire/4-Wire Off (4-Wire)
S2-8 Not Used N/A
}
}
7 ms
10 bits