Saving your settings (memory), P.90 – Pentax Optio E60 User Manual
Page 92
90
4
Taking Pictures
The Memory function is for saving the current camera settings even
when the camera is turned off.
For some camera settings, the Memory function is always set to O (On)
(the settings are saved when the camera is turned off), while for others
you can choose on or off (to choose whether the settings are saved or
not when the camera is turned off). The items which can be set to O (On)
or P (Off) in the Memory function are shown in the table below. (Items
not listed here are always saved in the selected settings when the
camera is turned off.) If you select O (On), the settings will be saved in
the status they were in immediately before the camera was turned off. If
you select P (Off), the settings will be reset to the defaults when the
camera is turned off. The table below also shows whether the Memory
default setting for each item is on or off.
Saving Your Settings (Memory)
Item
Description
Default
Setting
Face
Recognition
The Face Recognition mode set with the
I
P
Flash Mode
The flash mode set with the four-way controller (4) (p.79)
O
Drive Mode
The drive mode set with the four-way controller (2) (p.85,
p.86)
P
Focus Mode
The focus mode set with the four-way controller (5) (p.76)
P
Zoom Position The zoom position set with the Zoom/w/x button (p.73)
P
Sensitivity
The [Sensitivity] setting on the [A Rec. Mode] menu (p.81)
P
EV
Compensation
The [EV Compensation] setting on the [A Rec. Mode]
menu (p.83)
P
Digital Zoom
The [Digital Zoom] setting on the [A Rec.Mode] menu
(p.75)
O
DISPLAY
The display information display mode set with the 4/
P
File No.
If a new SD Memory Card is inserted when On has been
selected, file numbers are assigned sequentially.
O