Pentax Optio E60 - Manual (Page 155)

153
8
Settings
You can save battery power by setting the display to turn off
automatically when no operation is performed for a fixed time. After the
power saving function has been activated, the display returns to the
ordinary brightness by pressing any of the buttons.
1
Use the four-way controller (23) to select [Power
Saving] on the [R Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23)
to select [2min], [1min], [30sec],
[15sec], [5sec] or [Off].
4
Press the 4 button.
The Power Saving setting is saved.
Using the Power Saving Function
Power Saving does not function in the following situations.
• While the menu is being displayed
• While recording a movie
• While playing back
• While the camera is connected to a printer
• While the message is being displayed
• When no operation is performed after the camera is turned on,
Power Saving is activated after 15 seconds even if [5sec] is
selected.
How to display the [R Setting] menu
MENU
S e t t i n g
MENU
1 / 2
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
L a n g u a g e /
F o l d e r N a m e
E x i t
0 5 / 0 5 / 2 0 0 8
E n g l i s h
D a t e
3 button
4 button
Four-way controller
S e t t i n g 2 / 2
MENU C a n c e l OK O K
U S B C o n n e c t i o n
Vi d e o O u t
Brightness Level
P o w e r S a v i n g
A u t o P o w e r O f f
R e s e t 2 m i n
1 m i n
3 0 s e c
1 5 s e c
5 s e c
O f f