Pentax Optio E60 - Manual (Page 134)

132
6
Editing and Printing Images
Printing Using PictBridge
By connecting the camera to a printer that supports PictBridge using the
supplied USB/AV cable (I-UAV77), you can print images directly from the
camera without using a computer. Connect the camera to the printer and
select the images you want to print and the number of copies on the
camera.
1
Select [PictBridge] for the [USB Connection] mode on
the [W Setting] menu.
Refer to “Changing the USB Connection Mode” (p.150).
2
Turn off the camera.
3
Connect the camera to the printer using the supplied
USB/AV cable.
4
Turn the printer on.
5
When the printer is ready to print,
turn the camera on.
The printing mode selection screen
appears.
• You are recommended to use the AC adapter kit K-AC62
(optional) when the camera is connected to the printer. The printer
may not work properly or the image data may be lost if the battery
runs out of power while the camera is connected to the printer.
• Do not disconnect the USB/AV cable during data transfer.
• Depending on the type of printer, not all the settings made on the
camera (such as print settings and DPOF settings) may be valid.
• A printing error may occur if the selected number of copies
exceeds 500.
• Printing the index of the images (printing multiple images on a single
sheet) cannot be performed directly from the camera. Make the
settings on a printer supporting index printing function or use a
computer.
Connecting the Camera to the Printer
S i n g l e I m a g e
S e l e c t p r i n t i n g m o d e S e l e c t p r i n t i n g m o d e
A l l I m a g e s
DPOF A U T O P R I N T
OK O K O K O K