Programming your machine, Fax parameters – Panasonic DP-150FX User Manual
Page 36
PROGRAMMING YOUR MACHINE
36
34
ENERGY
SAVE
TIMER
POWER
SAVE
TIMER
1
5 min.
To reduce the power consumption in standby, select either Energy-
Saver or Sleep mode and specify the Delay Time
(5 to 240
minutes) for the machine to enter into the selected mode.
The Delay Timer setting is only available in the Energy-Saver or
Sleep Modes.
Energy-Saver Mode: Saves energy by consuming less power than
when in standby mode by turning off the fuser
unit after the specified time.
Sleep
Mode:
This is the lowest power state that the
machine enters after the specified time
without actually turning off.
*2
15
3
30
4
60
5
90
6
120
7
180
8
240
AUTO OFF
TIMER
1
5 min.
*2
30
3
60
4
90
5
180
6
240
35
DAYLIGHT TIME
1
Invalid
Selecting whether the clock adjusts for Daylight Saving Time
automatically. The built-in clock will advance 1 hour at 2:00 am on
the first Sunday in April and fallback 1 hour at 2:00 am on the last
Sunday in October.
*2
Valid
36
RING PATTERN
DETECT (DRD)
(See Note 2)
*1
Invalid
All ring patterns.
2
Valid
Select a ring pattern for automatic answering.
1: A
Standard ring pattern.
2: B
Double ring pattern.
3: C
Triple ring pattern (Short-Short-Long).
4: D
All other triple ring pattern, except the type C
described above.
37
RCV TO MEMORY
(----)
Enter a 4-digit password used to print out the received document
in memory by using F8-
2
(RCV TO MEMORY). When F8-
2
is set
to On, this parameter will not be shown on the LCD display. (See
page
)
39
PIN CODE ACCESS
*1
None
Selecting the access method (Prefix or Suffix) to dial a number
with PIN Code. (See page
2
Suffix
3
Prefix
52
DIAGNOSTIC
PASSWORD
(----)
Setting the password for Remote Diagnostic Mode. Please ask
your Panasonic Authorized Dealer for details.
53
SUB-ADDRESS
PASSWORD
(----)
Setting a 20-digit password for secured sub-address
communication.
Continued on the next page.
No.
Parameter
Setting
Number
Setting
Comments
Fax Parameters