Philips DVR2008 - Manual (Page 17)

EN 17
English
Connect
Connect to an analogue camcorder
TV -OUT ANTE NNA-IN
MAINS
Y P r P b VIDE O
OUTPUT
A U D IO L R CVBS INPUT
S-VIDE O
Y P b P r VIDE
A U D IO L R CVBS
O
AUDIO OUT VIDEO OUT
INPUT
Y P b P r
VIDE
A U D IO L R CVBS
O
1
2
2
INPUT
1
Connect a video cable (yellow end) from
the CVBS INPUT socket and to the S-
VHS or video output socket on the
camcorder.
2
Connect the audio cable (red/white
ends) from the AUDIO INPUT sockets
and to the audio output sockets on the
camcorder.
To view the video input, press
SOURCE repeatedly until ‘CVBS’ is
displayed.
Tip
To record from this device, see chapter ‘Record
from other devices’. •
•
Connect to a USB device or digital
camera
1
Connect a USB device or digital camera
to the
USB socket.
Note
The USB socket does not support a USB hub
device. Only digital cameras and devices which
support USB Mass Storage Device class standard
are supported. •
Tips
You can copy fi les from the recorder to your USB
device.
To view the contents of the connected USB device,
see chapter ‘Play – Play from USB’. •
•
1_DVR2008_97_eng_wk822.indd 17 1_DVR2008_97_eng_wk822.indd 17 2008-05-26 10:29:40 AM 2008-05-26 10:29:40 AM