Pentax MZ-6 - Manual (Page 65)

PENTAX FUNCTIONS
111
BASIC SETTING OF PENTAX FUNCTIONS
Follow the procedure below to set a Pentax Function.
1
Display Pentax Function No.
qTurn the mode dial to PF.
wMove the select switch to display the
Pentax Function No. You wish to set.
The Pentax Function No. will be dis-
played on the LCD panel
APPENDIX
110
PENTAX FUNCTIONS
The camera provides 11 Pentax Functions so you can set
the camera according to your shooting preferences.
[F1] Selection of range of auto bracketing correction value p.113
[F2] Selection of re-set to single frame after auto bracketing
exposure
p.113
[F3] Selection of shutter release delay time with the remote
controller
p.114
[F4] Selection of whether or not auto focusing is used during
remote control photography
p.114
[F5] Selection of the metering method with AE lock p.114
[F6] Selection of whether or not AE lock is used when the
subject is in focus.
p.115
[F7] Selection of autofocus method in the action
program mode
p.115
[F8] Selection of illumination method of the LCD panel p.115
[F9] Selection of Mode dial illumination pattern when power
switch is turned ON
p.116
[F10] Selection of the state of the end of film when rewinding p.116
[F11] Selection of the built-in flash in the wireless flash mode p.116
Example:
Selection of Remote
controller operation
time.
Pentax Function No.
MZ-6(E)06 F1/109-118 11/8/02 12:11 PM Page 110