Closing the powerstation – Parker Hannifin PA Series User Manual
Page 44
Chapter 4: Maintaining the PowerStation
Performing Internal Maintenance
PA PowerStation User Guide
4-7
4
Lift the backshell off of the PowerStation to expose the board.
You are now ready to perform any internal maintenance necessary.
Closing the PowerStation
1
Replace the backshell on the PowerStation.
2
Remount the PowerStation in the enclosure, refer to Installing the PA
PowerStation on page 2-7.
3
Reconnect the following cables:
•
Power Input cable
•
Ground cable
•
any communication cables
•
any keyboard and mouse cables
4
Turn on the PowerStation.