Panasonic AJ-P2C016RG - Manual (Page 18)

18 Parts and their Functions: Audio (output) Function Section
9. AUDIO OUT connector (XLR, 5-pin)
This connector outputs audio signals recorded on
Channels 1/2 or 3/4.
Output signals are selected with the 10. MONITOR
SELECT CH1/2 / CH3/4 selector switch.
10. MONITOR SELECT (audio channel selection)
CH1/2 / CH3/4 selector switch
Use this switch to select the audio channel whose
signals are output to the speakers, earphones or AUDIO
OUT connector.
CH1/2: Signals on audio channels 1 and 2 are output.
CH3/4: Signals on audio channels 3 and 4 are output.
The channel indications on the display window and on
the audio level meter in the viewfinder are synchronized
with this selector switch.
11. MONITOR (audio selection) CH1/3 / ST / CH2/4
selector switch
Use this switch in combination with the MONITOR
SELECT switch to select the audio channels whose
signals are output to the speakers, earphones, or
AUDIO OUT connector.
CH1/3: Signal on audio channel 1 or 3 is output.
ST: Stereo audio signals on audio channels 1 and
2 or audio channels 3 or 4 are output. The
stereo signals can be changed to mixed
signals using a menu option.
CH2/4: Signal on audio channel 2 or 4 is output.
* You can select between stereo and mixed signal types using
the menu option MONITOR SELECT. This menu option can
be found in the screen on the MAIN
OPERATION page.
12. MONITOR (volume) control
Used to control the volume of sound output from the
monitor speakers and earphones.
13. ALARM (warning alarm volume adjustment)
control
Used to control the volume of the warning sound
emitted from 14. Speakers or earphones connected to
the 15. PHONES jack.
If the control is minimized, no alarm is audible.
14. Speakers
The speakers output EE sound during recording, and
reproduced sound during playback.
The speakers emit an alarm sound when the warning
lamp blinks and/or the indicator activates.
When the 15. PHONES jack is connected with
earphones, sound from the speaker is automatically
muted.
15. PHONES (earphones) jack (mini jack)
This connector is designed for audio monitoring (stereo)
earphones. When earphones are connected, sound
from the speakers is automatically muted.
Both the front and rear connectors output the same
sound.
Audio (output) Function Section
MONITOR
switch
MONITOR SELECT switch
CH1/2 CH3/4
CH1/3 Audio channel 1 Audio channel 3
ST
Stereo signals from
audio channels
1 and 2*
Stereo signals from
audio channels
3 and 4*
CH2/4 Audio channel 2 Audio channel 4
AJ-HPX3700G-VQT1V68_eng.book 18 ページ ２００８年１０月１５日 水曜日 午後６時３８分