Pioneer DVR-LX70 - Manual (Page 84)

Copying and backup 09
84
En
• It may not be possible to copy from a
DVD disc that was recorded on a
different DVD recorder or a PC.
1 Select ‘Copy’ from the Home
Menu.
2 Select ‘DVD/CD  HDD’.
3 Select a Copy List type.
• Selecting Create New Copy List will
erase any Copy List already stored in the
recorder.
4 Add titles to the Copy List
(highlight a title and press ENTER to add).
Titles you’ve added to the Copy List are
highlighted in pink.
5 Select ‘Next’ from the
command menu panel to proceed to the
title edit screen.
6 Select a title to edit.
A menu appears of Copy List editing
commands:
• Erase – Erase individual titles from the
Copy List (see Erase on page 69).
• Move – Change the order of titles in the
Copy List (see Move on page 75).
• Preview – Check the content of a title in
the Copy List.
• Cancel – Exit the menu.
Repeat this step for as many titles you have
that need editing.
7 Select ‘Next’ from the
command menu panel to proceed to the
copy options screen.
• Select Recording Mode if you want to
change the recording quality (see
Recording Mode below).
8 Select ‘Start Copy’ to start
copying.
Recording Mode
1 Select ‘Recording Mode’ from
the command menu panel.
2 Select a recording mode for
the copy.
• High-Speed Copy 1 – The Copy List is
copied at the same recording quality as
the original.
• XP, SP, LP, EP, SLP, SEP, MN 2 – The Copy
List is copied at the specified recording
quality in real-time. (Note that if you copy
at a higher quality setting than the
original, the copy will not be better
quality than the original.)
If you select MN above, you can also
change the level setting ( MN1 to
MN32 3 , LPCM or XP+ 4 ) from the
Recording Quality box that appears.
HOME
MENU
ENTER
ENTER
ENTER
ENTER
ENTER
Note
1 When copying to a DVD-R/-RW (Video mode) or DVD+R/+RW, the chapter markers in the copy may not be in
exactly the same position as the original.
2 When the copy mode is set to something other than High-Speed Copy for copying to a DVD-R/-RW (Video mode)
or DVD+R/+RW, the chapter markers of the original are not copied. Chapter markers are put into the copy at
regular intervals, according to the Auto Chapter setting (see also Auto Chapter (Video) and Auto Chapter
(DVD+R/+RW) on page 114).
3 When copying to a DVD+R/+RW, MN1 to MN3 and SEP modes are not available.
4 XP+ mode available only when copying to HDD.
ENTER
ENTER
ENTER
ENTER
DVRLX70_TF_EN.book 84 ページ ２００７年８月１日 水曜日 午後４時１４分