The initial setup menu – Pioneer DVR-LX70 User Manual
Page 109
The Initial Setup menu
109
En
14
Tuner
Auto Channel
Setting
(Taiwan and
Philippines model)
Antenna •
Select if you receive channels from an antenna. It
takes a few moments for the auto tuning to complete.
Cable
Select if you receive channels via cable. It takes a few
moments for the auto tuning to complete.
Auto Channel
Setting
(Other)
Next Screen
Proceed to the next screen, select your country, then
wait for automatic tuning to complete. The channel
mapping screen should appear when the recorder is
set up. Press
ENTER to exit this screen.
Manual CH Setting
Next Screen
Proceed to the next screen if you need to adjust any
of the settings made by auto tuning. Select your
country, then proceed to the manual channel setting
screen:
• Change channel presets using the
PREV/
NEXT buttons.
• To skip the displayed channel (because there is no
station assigned to that channel), change the
Skip
setting to
On.
• Set the
CH System setting to match the channel
system of your country or region (except Taiwan and
Philippines model).
• Set the
Channel setting to the channel you want to
assign to the current channel preset (except Taiwan
and Philippines model).
• To manually fine tune the channel, change the
AFT
setting to
Off then adjust the Level setting.
• Set the
Sound System setting to match the sound
system of your region (except Taiwan and Philippines
model).
• The
Name field allows you to input a name of up to
five characters for the current channel preset (except
Taiwan and Philippines model).
Channel Swapping
(except Taiwan and
Philippines model)
Next Screen
Proceed to the next screen to swap channel
assignments of different presets so that you can
group together presets that naturally go together.
Select two presets to swap then press
ENTER.
G-Code CH Setting
Next Screen
Proceed to the next screen to assign channel
numbers to the guide channels as necessary. Look in
your TV guide to see which channel numbers should
be assigned to which guide channels. Press
ENTER
when your done to leave this screen.
Setting
Options
Explanation
DVRLX70_TF_EN.book 109 ページ 2007年8月1日 水曜日 午後4時14分