Using the built-in tv tuner, Recording, Cprm – Pioneer DVR-LX70 User Manual
Page 35: Recording equipment and copyright, Changing audio channels
Recording
35
En
05
CPRM
CPRM is a copy protection/scrambling
system developed for the recording of ‘copy
once’ broadcast programmes. CPRM stands
for Content Protection for Recordable Media.
This recorder is CPRM compatible, which
means that you can record copy-once
broadcast programmes, but you cannot then
make a copy of those recordings. CPRM
recordings can only be made on CPRM-
compatible DVD-R (ver. 2.0/8x or higher) or
DVD-RW (ver. 1.1 or higher) discs formatted
in VR mode, DVD-RAM discs or on the HDD.
DVD CPRM recordings can only be played
on players that are specifically compatible
with CPRM.
Recording equipment and
copyright
Recording equipment should be used only
for lawful copying and you are advised to
check carefully what is lawful copying in the
country in which you are making a copy.
Copying of copyright material such as films
or music is unlawful unless permitted by a
legal exception or consented to by the
rightowners.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Using the built-in TV tuner
There are three different ways to select TV
channels. Note that you can’t change the TV
channel during playback, recording or
during recording standby.
•
CH +/– buttons
•
Number buttons
For example, to select channel 4, press
4
then
ENTER; for channel 34, press 3, 4,
ENTER.
1
•
CH +/– buttons on the front panel
Changing audio channels
Taiwan and Philippines model:
Some TV programmes are broadcast with
both a main and a Secondary Audio
Programme (SAP). You can change the TV
audio using the
AUDIO button.
•
Press to change the audio type.
The current audio channel is displayed on-
screen.
• If
SAP is selected, but there is no SAP
channel being broadcast, you will still
hear the main audio channel.
• If the sound is poor quality when set to
Stereo, you can often improve it by
changing to
Mono.
Note
1 • Taiwan and Philippines model: Antenna channels are numbered 2 through 69. Cable channels are numbered
1 through 125.
• Other: Channel presets are numbered 1 through 99.
CH
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CLEAR
CLEAR
AUDIO
Mono
SAP
Stereo
DVRLX70_TF_EN.book 35 ページ 2007年8月1日 水曜日 午後4時14分