Pioneer DVR-LX70 - Manual (Page 117)

The Initial Setup menu
117
En
14
Colour RGB (0–255) Use if colours are weak and black appears to ‘float’
on the
RGB (16–235) setting.
RGB (16–235) Use this setting if colours appear overly rich and the
black too deep on the
RGB (0–255) setting.
YCbCr 4:2:2 The video signal is output as a YCbCr 4:2:2
component signal. This is the standard setting for
HDMI-compatible devices.
YCbCr 4:4:4 The video signal is output as a YCbCr 4:4:4
component signal.
• Depending on the connected device some settings may not be available.
• When a DVI device is connected, the
YCbCr 4:2:2 and YCbCr 4:4:4 options are not available.
Transmission Mode Auto Select this setting to output video in the optimum
transmission mode according to the connected
device.
Normal Select this setting when pictures are not shown
properly.
If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case,
press
 OPEN/CLOSE while holding down the  (Stop) button on the front panel to switch the setting.
Audio Output Auto • Dolby Digital, MPEG and DTS sources are output as a
bitstream signal. However, depending on the
Audio
Out setting, number of audio channels, and the HDMI-
connected device, Linear PCM audio may be output.
PCM All audio signals are converted to Linear PCM (except
DTS).
Bitstream Priority Select if the connected device is compatible with
bitstream audio.
This setting is not available when a DVI device is connected.
HDMI Control On • Enable the HDMI Control function. Select this option
when connected to an HDMI Control-compatible
Pioneer plasma television, AV system (amplifier or AV
receiver etc.).
Off Disable the HDMI Control function. Select this option
when not connected to an HDMI Control-compatible
component, or when connected to a component
manufactured by a company other than Pioneer.
• For more information about HDMI Control, see HDMI Control on page 22.
• This setting is available even if you are not connected to an HDMI device.
• For more information see Troubleshooting on page 127.
Setting Options Explanation
DVRLX70_TF_EN.book 117 ページ ２００７年８月１日 水曜日 午後４時１４分