Pioneer DVR-LX70 - Manual (Page 128)

Additional information 15
128
En
If the unit does not operate normally due to external effects such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.
If the picture freezes and the front panel and remote control
buttons stop working
• Press  (Stop) then try restarting
playback.
• Press the front panel  STANDBY/ON
button to switch the power off, then
switch back on and restart playback. If
the power fails to switch off, press and
hold
 STANDBY/ON for five seconds
until the power switches off.
HDMI Control does
not respond • Verify that the HDMI cable is firmly connected (page 21).
• Check whether HDMI Control is set to On for this unit and the
device connected to this unit. For more information, refer to the
operating instructions of your plasma television or AV system.
• Depending on the type of plasma television, some HDMI input
terminals do not support the HDMI Control function. For details, see
the operating instructions supplied with your plasma television.
• HDMI Control may not operate properly if you do not use an HDMI
cable that supports the HDMI 1.3 Specification.
• This function may not work properly if you have multiple recorders
connected to a single plasma television or AV system. For more
information, refer to the operating instructions of your plasma
television or AV system.
• Controls may not function properly in certain situations, such as
immediately after you have connect an HDMI cable, turn this unit’s
power off or remove the power cable for this unit or the connected
component. If you experience any problems, set HDMI Control to On
for all connected units, and then display the pictures stored on this
unit on your plasma television to improve the situations.
• Check whether the connected component supports HDMI Control
or not.
• Certain functions are not supported on with plasma televisions and
AV systems.
• We cannot guarantee this unit will work with HDMI Control-
compatible components other than those made by Pioneer. When
using HDMI Control-compatible components manufactured by
companies other than Pioneer, set the
HDMI Control to Off
(page 117).
Problem Remedy
HDD/DVD
DivX COPY
OPEN/CLOSE
STANDBY/ON USB DV IN
CH INPUT SELECT
STOP REC
STANDBY/ON
DVRLX70_TF_EN.book 128 ページ ２００７年８月１日 水曜日 午後４時１４分