Pioneer DVR-LX70 - Manual (Page 110)

The Initial Setup menu 14
110
En
Video In/Out
Input Colour
System Next Screen Proceed to the next screen to set the input colour
system for the external input and the built-in TV tuner.
Use the
CH +/– buttons to change the preset. On the
default Auto setting the recorder can generally
correctly detect whether the input signal is PAL,
SECAM, 3.58 NTSC or PAL-60, but in some cases you
may have to set it manually if the picture is displayed
incorrectly.
See also About the input colour system on page 119 for more information on this setting.
Component Video
Out Interlace • Select if your monitor/TV is not compatible with
progressive-scan video.
Progressive Select if your monitor/TV is progressive-scan
compatible. Check the operating instructions that
came with your monitor/TV if you’re not sure.
If your TV is incompatible with progressive scan video and you select Progressive, you will not be able to see any
picture at all. In this case, press  OPEN/CLOSE while holding down the  (Stop) button on the front panel to
switch to Interlace (this also switches Screen Resolution on page 116 to the default setting).
NTSC on PAL TV On NTSC discs will play correctly on PAL-only TVs.
Off • Use if your TV is already NTSC-compatible.
Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating
instructions that came with your TV. See also About NTSC on PAL TV on page 119 for related information.
Audio In
NICAM Select
(except Taiwan and
Philippines model) NICAM • Record the NICAM audio in a NICAM broadcast.
Regular Audio Record the non-NICAM audio in a NICAM broadcast.
(You can still switch the audio to record using the
AUDIO button before recording.)
Tuner Level
(except Taiwan and
Philippines model) Normal • Standard setting.
Compression Use if the audio level from the built-in tuner is
excessive, causing distortion.
External Audio Stereo • Select if the audio from the currently selected
external input is standard stereo.
Dual Mono/
Bilingual Select if each channel carries a separate soundtrack.
When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder
whether the audio is stereo or dual mono/bilingual. This has priority over the setting you make here.
Setting Options Explanation
DVRLX70_TF_EN.book 110 ページ ２００７年８月１日 水曜日 午後４時１４分