Pioneer DVR-LX70 - Manual (Page 18)

Connections 02
18
En
Connecting to a cable box or
satellite receiver (1)
If you are using a cable box or satellite
receiver with only a few scrambled channels,
follow the setup on this page
1 . If many or all
the channels are scrambled, we recommend
using the setup on the following page.
Using the setup on this page you can:
• Record unscrambled channels by
selecting them on this recorder.
• Record scrambled channels by selecting
them on the cable box/satellite receiver
and using the Auto Start Recording
feature (see Automatic recording from a
satellite tuner on page 47).
• Watch one channel while recording
another.
Important
• Do not connect this recorder ‘through’
your VCR, satellite receiver or cable box.
Always connect each component
directly to your TV or AV amplifier/
receiver.
1 Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
2 Connect the AUDIO and VIDEO
OUTPUT jacks (1 or 2) on this recorder to
a set of audio/video inputs on your TV
using a set of A/V cables (as supplied).
This enables you to watch the output from
this recorder.
3 Connect the audio/video output of
your cable box/satellite receiver to the
INPUT 1 jacks on this recorder using a set
of A/V cables.
This enables you to record scrambled TV
channels.
Note
1 The diagram shows standard video connections, but you can alternatively use the S-Video or component video
connections if they’re available.
AC IN
DIGITAL AUDIO OUT
COAXIAL HDMI OUT CONTROL IN
S-VIDEO VIDEO AUDIO L R
ANTENNA IN
OUT
INPUT 1 /AUTO START REC
INPUT 3 S-VIDEO
VIDEO AUDIO L R
Y P B P R COMPONENT VIDEO OUT
OUTPUT 1
OUTPUT 2
TV
Antenna/cable TV
wall outlet
Cable box/
Satellite receiver
ANTENNA
OUT
1
1
OUTPUT 1
INPUT 1/AUTO
START REC
1 2
3 To antenna
input
To antenna
input
From antenna
output
To audio/
video input
From audio/
video output
ANTENNA
IN (RF IN)
DVRLX70_TF_EN.book 18 ページ ２００７年８月１日 水曜日 午後４時１４分