Paradise 205486 REV F User Manual

Page 70

Text mode
Original mode

208495 REV C

Operations Manual, HPA2, Compact Outdoor SSPA

e) In the case of IPNet or SNMP protocols, clear the PC ARP cache by issuing the

following command in a Windows command line interface: arp –d.

f) Binary and Terminal protocols are no longer supported by Compact Outdoor units. Use

the currently available interfaces instead.

7.3.5 The FSK link between a modem and the SSPB unit is not working

Possible cause: The unit is set to use IPNet or SNMP interface.

Possible solution: Set the SSPB protocol setting field to “Normal” protocol or (and) remove
any connection to SSPB interface select pins j and e on the J4 connector. Reset AC power.