beautypg.com

Maintenance, Throttle cable freeplay – Polaris Sportsman 550 EFI User Manual

Page 123

background image

119

MAINTENANCE

Throttle Cable Freeplay

4. Place the transmission in PARK. Lock the parking brake.
5. Start the engine and allow the idle to stabilize. If necessary, tap the

throttle lever to ensure the idle speed settles.

6. If idle speed remains above or below the recommended setting (see

specification pages), verify the correct gap. If gap is correct and idle

speed is still not satisfactory, please see your Polaris dealer for ser-

vice.

7. With the engine running, turn the handlebars fully to the left and

right. Tap the throttle lever at each turn, verifying that idle RPM

returns to the recommended setting. If idle speed increases, it may

be necessary to increase the gap between the stop pin and throttle

arm, but do not exceed the recommended 2-3 mm gap.

8. When adjustments are complete, tighten the locknut.
9. Squeeze the end of the rubber boot and slide it over the cable

adjuster to its original position.

10. Ensure the control cover seal is in place, then reinstall the cover and

screws.

This manual is related to the following products: