Pioneer Premier Flash Memory Multimedia AV Navigation Receiver AVIC-F90BT - Manual (Page 103)

You can listen to the radio by using the naviga-
tion system. This section describes operations
for HD Radio
™.
p For details concerning operation, refer to
the HD Radio tuner
’s operation manual.
% Touch [Digital Radio] on the “AV
Source
” menu to display the “Digital
Radio ” screen.
= For details concerning operations, refer to
Screen switching overview on page 18.
Reading the screen
1
a
9
7
6
2 3 4 5
8
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the radio is tuned to: FM1,
FM2, FM3 or AM.
3 Preset number indicator
Shows what preset item has been selected.
4 Frequency indicator
5 Multicasting indicator
Shows the number of multicast channels in
the current frequency.
6 Signal level indicator
7 Blending mode indicator
= For details, refer to Switching the re-
ception mode on page 105.
8 Signal type indicator
Shows the type of signal currently being re-
ceived. If a digital broadcasting is received,
“D” appears. Otherwise, “A” appears.
9 Seek type indicator
= For details, refer to Switching the seek
mode on page 105.
a Detailed information
= For details, refer to Switching the display
on the next page.
Using the touch panel keys
1 2
3
4
5
6
1 Recalls equalizer curves
= For details, refer to Recalling equalizer
curves on page 140.
2 Displaying the “Function” menu
= For details, refer to Using the
“Function” menu on the next page.
3 Select a preset channel
[c] or [d] can be used to switch presets chan-
nels.
4 Perform manual tuning
To perform manual tuning, touch [c] or [d]
briefly. The frequencies move up or down one
step at a time.
Perform seek tuning
To perform seek tuning, keep touching [c] or
[d] for about one second and release. The
tuner will scan the frequencies until a broad-
cast strong enough for good reception is
found.
p You can cancel seek tuning by touching
either [c] or [d] briefly.
p If you keep touching [c] or [d], you can
skip broadcasting frequencies. Seek
tuning will start as soon as you release
the keys.
5 Select a band
Touch [ Band] repeatedly until the desired
band is displayed: FM1, FM2, FM3 or AM.
p This function is convenient for preparing
different preset lists for each band.
6 Displaying the map screen
Using the HD Radio (Digital Radio)
En
103
Chapter
19
Using
the
HD
Radio
(Digital
Radio
)