Philips CRT TV - Manual (Page 22)

22
Connect Accessory Devices
&
Connect the RF Antenna or Cable TV cable 1 to the RF IN socket of your
VCR.
é
Connect another RF cable 2 from the output of your VCR to the TV’s
75 Ω x jack.
“
Connect the satellite antenna cable 3 to the satellite receiver’s SATELLITE
IN jack.
‘
Connect the AV cables 4 to the satellite receiver’s AV OUT jacks and to
the VCR’s AV IN jacks.
(
Connect the VCR’s AV OUT jacks 5 to the TV’s AV2 IN jacks.
VCR
CABLE
SAT
≈
IN OUT
SAT
IN
OUT
IN
OUT
AV 2
in AV 1
in
Monitor
out
COMPONENT VIDEO INPUT
VIDEO
L / Mono
R
Y
Pb
Pr
AUDIO S-VIDEO
5
75
3
4
Equipment with VIDEO connectors only
&
Connect the video cables to the equipment’s AV OUT jacks and to the TV’s
AV1 or AV2 IN jacks.
é
Connect the audio cables to the equipment’s AUDIO L/Mono and R jacks and
to the L/Mono AUDIO and R AUDIO AV1 or AV2 jacks on the TV.
(According to where you connected the video cables, to AV1 or AV2 .)
Equipment with an S-VIDEO connector
&
Connect an S-VIDEO cable the AV2 S-VIDEO input.
Note: When using the S-VIDEO connector DO NOT CONNECT any device to the
VIDEO input.
é
Connect the audio cables to the equipment’s AUDIO L/Mono and R jacks and
to the L/Mono AUDIO and R AUDIO AV2 jacks on the TV.
AV 2
in
AV 1
in
Monitor
out
COMPONENT VIDEO INPUT
VIDEO
L / Mono
R
Y
Pb
Pr
AUDIO S-VIDEO
DVD Player or other accessory digital source equipment
Satellite Receiver with a VCR