Philips CRT TV - Manual (Page 10)

10
Use of the menus
PICTURE
SOUND
FEATURES
INSTALL
SOUND
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
HEADPHONE
STEREO
SAP
AUDIO OUT
SPEAKERS
HEADPHONE
VOLUME
BALANCE
Sound menu
Select the menu item with the cursor up/down and adjust the settings with
the cursor left/right.
Treble
Treble attenuates or amplifies the high-frequency response of the audio
output signal.
Bass
Bass attenuates or amplifies the low-frequency response of the audio output
signal.
Balance
Adjusts the balance of the right and left speaker’s sound output.
AVL (Automatic Volume Leveller)
AVL
ON automatically controls the volume level to avoid too large level
differences, especially when switching to another channel or during
commercial breaks.
Incredible Surround
According to the received TV signal, Mono or Stereo or Dolby Surround, you
can select various Surround Sound listening modes.
• In Mono : select MONO or SPATIAL with the cursor left/right.
SPATIAL enables you to hear a spatial effect of sound.
• In Stereo : select STEREO , INCREDIBLE SURROUND or DOLBY VIRTUAL.
INCREDIBLE SURROUND : it seems as though the TV’s speakers are
spread further apart from one another.
DOLBY VIRTUAL (with Dolby Surround signals): enables you to
experience the effect of Dolby Pro Logic Surround, reproducing a rear
sound effect.
Headphone
Allows you to adjust the volume and balance of the headphone.
&
Press the cursor right.
é
Select VOLUME or BALANCE with the cursor up/down.
“
Press the cursor left/right to adjust.
‘
Press the MENU/SELECT button to return.
Stereo
Select
MONO or STEREO with the cursor left/right.
When STEREO has been selected, the television will reproduce any stereo
broadcast signal it receives.
If Stereo is not present on a selected show and the TV is placed in
STEREO
mode, the sound coming from the set will remain monaural.
SAP
An
SAP is an additional part of the stereo broadcast system.
Send as a third audio channel, an SAP can be heard apart from the current TV
program sound.TV channels are free to use SAP for any number of purposes.
If an SAP signal is not present with a selected program, the SAP option
cannot be selected.
Also, if
SAP is selected on a channel (with SAP ) and you select another
channel, when you return to the original channel, SAP will be off.
You will have to reselect the SAP feature.